A 6 way will be easiest as it will facilitate some.

most forward-leaning cia director george hw bush May 28, Spear cut isn't really a proper technique in terms of your 31 Yes it is, and it is part of the Lantra.

Learn more about starting chainsaws.

Jan 05, Start the felling cut (back of tree) by aligning the guide bar slightly above the bottom of the sink cut, ensuring that you are standing to the side of the tree when making this cut. Stop cutting when there is a parallel strip of uncut timber not less than 1/10th of the diameter of the tree.

This is the"hinge". The tree should now start to fall, so move quickly out of the way to your safe place. Remember to saw right to the hinge width!

When the directional notch has been made, it is time to saw the felling cut towards the directional notch.

The felling cut will normally be level with or slightly above the level of the directional notch. The technique used for making the felling cut depends on the thickness of the trunk and the length of the guide bar.

Use a breaking bar, felling bar or felling wedge in order to ensure safe felling. Jun 28, The term felling refers to the process of cutting down entire trees from the base of the trunk. This process is not as simple as it may sound; In fact, it can be dangerous since you are cutting from the ground level. Felling requires precision and great care to ensure the safety of people around, the surrounding area and preservation of the wood.

large tree may be felled against its natural lean by using the boring technique. Use the open-face notch and bore cut the tree to establish the hinge. DO NOT CUT OUT THE BACK. Allow enough backwood to keep the tree secure.

Remove the saw from the bore cut and insert wedges tightly into it.

Release the tree from the back. Complete the technique by wedging the tree over. This technique is for. We specialize in Tree Felling, Tree Trimming, Tree Removal, Stump Grinding, Stump Removal, Palm Tree Removal, Hedging, Site Clearing, Grass Cutting and Landscaping around Cape Town and surrounds. Our company has many years experience. We have highly skilled staff for any size job. No job too big or too small. Jul 12, Tip the tree a little then back up and push the bottom of the root ball to lift it out.

Catch the roots with the blade and roll the tree a little to knock the dirt off the roots. Mar 25, Make the cut approximately inches from the ground (no higher than your hip) at a right angle. The cut should be made ¼ of the diameter of the tree or up to ⅓ of the diameter but no deeper. Make another cut into the notch above your first cut, at a degree angle to cut out all of the wood for a clear bushmulch.bar